ILAFLON Select R

c

A single-layer system with good conditions.

  • System with excellent non-stick effect
  • Best cleanability
  • Suitable for microwave inner housings, raclette pans (aluminised steel) and much more

Characteristic

Number of Layer 1
Coating Thickness µm 12-18
Curing Temperature °C 380
Service Temperature °C 250

ILAFLON Select R One Coat

is a one-coat system based on PTFE resin which is mainly used for milk frother or, under certain circumstances, also for deep fryers.

1. Top Coat with good cleanability and good non-stick effect

2. Special prepared substrate for an optimum adhesion

Substrates

Substrate Pretreatment Suitability
Alu press alkaline degrease r
Alu cast alkaline degrease r
Alu steel alkaline degrease r
Carbon steel - 5
Stainless steel degrease & sandblasting with corundum r

Applications

Application Pretreatment Suitability
Bread maker container - 5
Bread maker dough hook see above rr
Panini maker see above r
Party grill / electrical grill see above r
Baking and roasting oven trays see above r
Pizza maker see above r
Pancake (Crêpes) plate - 5
Waffle maker - 5
Belgium waffle maker - 5
Pancake maker - 5
Sandwich maker - 5
Donut maker - 5
Deep fat fryer see above r
Air fryer see above r
Raclette pan (phosphated carbon steel) - 5
Raclette pan (aluminized steel) see above rrr
Raclette grill plate see above r
Microwave (interior) see above rrr
Baking and roasting oven (interior) see above rrr
Rice cooker see above r
Electrical wok see above r
Slow Cooker / Skillet see above r
Milk frother - 5
Cheese fondue pot - 5
Meat fondue pot - 5
Chocolate fondue pot - 5
Iron soles see above r

Care Instructions

Care instructions Electric v

Electrical appliances - Use and Care Instructions

Non-stick coated small electrical household appliances are available in one-, two- or three-layer versions, as well as with ceramic-reinforced coatings.

We offer products with different bases:

  • SP-xxx products = Silicone polyester base
  • Ceralon products = Ceramic (Sol-Gel) base
  • Select R products = PTFE / Resin base
  • Corflon = PTFE waterbased

The systems are characterised by good scratch resistance, abrasion resistance, as well as the best non-stick properties. Good cleanability is guaranteed for all coated parts.

All articles coated should generally be protected from overheating. Overheating leads to a reduction in the non-stick effect and reduced lifespan. Likewise, we do not recommend the use of metal utensils and other sharp objects when using this cookware.

Notes on use

  • Before first use, remove all packaging and labels. Clean the object in liquid detergent and hot water, or rub with a damp cloth and detergent.
  • Electrical appliances should never be heated for a long period of time when empty. Do not overheat!
  • Make sure that the power cord and the plug do not come into contact the water
  • Higher temperatures during heating can cause discolouration and can damage the non-stick layer.
  • Use only nylon or wood utensils so as to not damage the surface sealant.

Cleaning and care

  • Clean the item with hot water, detergent and a sponge cloth, or with the soft side of a cleaning sponge. A soft dish brush can also be used to clean the object.
  • Stubborn food residue should first be soaked with hot soapy water.
  • Under no circumstances are should you clean the household appliances with the sharp side of a soft sponge or cleaned metal sponges. This will scratch and destroy the non-stick layer.
  • Generally speaking, non-stick coated parts that can be detached from the base of the electrical unit can be cleaned in the dishwasher, however, it is not recommended.

Testing Methods

Basic Properties v

Abrasion Tests v

Non-stick Tests v

Corrosion Tests v

x