Solvent based systems

ILATECH peelable coating

The ILATECH peelabel products are suitable for galvanic processing in the medical industrie.

Regulatory guidelines in this industry demand high product and process reliability. We apply those guidelines accordingly to auxiliary materials such as peelable coatings in galvanic processes that come into direct contact with the medical device.

As one- or two-layer systems, the products can be used reliable under hot or extremely acidic process conditions (chemical nickel plating or chromium baths).

The product can be modified to meet customer-specific requirements. Whether on rough or smooth surfaces, whether for rapid or less rapid removal – the programmable bonding properties can be adjusted to achieve specific characteristics.

We're sure to have the right product for your application; contact us to learn more.

ILATECH EP

The ILATECH EP products are made out of an epoxy basis system.

ILATECH EP coatings offer outstanding corrosion and chemical resistance and their adhesion on most common substrate is excellent.

In order to achieve their full performance, these coatings must be cross-linked, so that a three-dimensional network is obtained. For that purpose, the epoxy resin must be reacted with components able to interact with its epoxide groups. Certain properties, such as the temperature stability or the flexibility of the coating, can be finely tuned according to the kind of hardener selected; therefore, a wide range of requirements can be met.

Since their curing temperature is relatively low, various metallic and non-metallic substrates can be used.

Further properties can also be obtained with the addition of additives or the use of special raw materials.

We certainly have the right coating for your application; contact us for more information.

ILATECH P

The ILATECH P products are based on polyamide-imides (PAI) technology.

Such coatings offer very good mechanical strength and resist most chemical solvents. They also have excellent thermal properties. With appropriate pretreatment, the ILATECH P products a wide range of substrates.

ILATECH P standard systems can be modified to meet specific customer requirements.

ILATECH P coatings can be used in medical applications, for example, or also in the automotive industry.

We're sure to have the right product for your application; contact us to learn more.

ILATECH R

The ILATECH R products are based on polyethersulfones (PES).

These coatings feature good chemical resistance and dielectric properties. With appropriate pretreatment, the products of the ILATECH R assortment bond to a wide range of substrates.

ILATECH R coatings are used in many different application areas, including the automotive and medical industries, and also in industrial release processes.

Our standard systems can be modified for specific applications and customized with special properties.

We're sure to have the right product for your application; contact us to learn more.

ILATECH S

The ILATECH S products are made out of a silicone basis.

The ILATECH S coatings are stable over a wide range of temperatures, and present therefore an excellent lifespan. Additionally, their dielectric properties are excellent and they are water-repellent. With an appropriate pretreatment, the products from the ILATECH S range will adhere on a great variety of substrates.

Given their excellent heat stability, coatings out of the ILATECH S range are well indicated for the automobile industry or in applications where high temperatures occur.

Further properties can also be obtained with the addition of additives or the use of special raw materials.

We certainly have the right coating for your application; contact us for more information.

ILATECH SP - Specialty Line

ILATECH SP is the decorative coating in the "home & garden" area.

A single-layer system that is available in many colors and metallic tones.
The system is characterized by a medium gloss, good surface hardness and a good easy-to-clean effect.

It can set excellent accents especially in the decorative area, such as handles and attachments. Properties such as corrosion protection and abrasion resistance also support the durability of the tools in daily use.

Advantages of product ILATECH SP:

• Gentle coating thanks to lower stoving temperatures of 200-240 °C [392-464 °F]
• Wide range of colors and design aspects possible
• Good corrosion protection especially for add-on parts

We certainly have the right coating for your application. Please contact us for more information.

ILATECH peelable coating and topcoat

The ILATECH peelable and topcoat products were developed for the partial coating of components using the galvanic process.

ILATECH peelable coating can be individually adjusted according to the roughness of the surface to be coated. The combination system, ILATECH peelable coating with ILATECH topcoat, was specially developed for galvanic Cr6+ baths of more than 24 hours in duration.

The products are ideally suited for metal substrates and in some cases also for plastic substrates.

To facilitate your manufacturing processes, both systems are available in different colors.

We're sure to have the right product for your application; contact us to learn more.

ILATECH K2 and ILATECH DD

The ILATECH K2 and ILATECH DD products are our most versatile coating products.

These products comprise two components, which must be mixed before application.

ILATECH K2 and ILATECH DD result from the reaction of OH-containing components such as polyacrylates with isocyanate-containing materials. After burning-in and crosslinking, a polyurethane network is formed. The selection of the two components makes it possible to adjust a broad palette of properties.

The biggest advantage of these coatings is their ability to crosslink at relatively low temperatures: some systems crosslink even at room temperature. This can reduce the cost of thermal burn-in accordingly. Moreover, the coatings can be applied to temperature-sensitive substrates such as composites, for example.

Despite the low burn-in temperature, ILATECH K2 and ILATECH DD coatings feature very good abrasion resistance as well as chemical and UV stability. With appropriate pretreatment, bonding to common substrates is excellent.

Uses for these coatings include exterior applications and points of use requiring a low burn-in temperature.

Both systems can be further modified to incorporate additional properties.

We're sure to have the right product for your application; contact us to learn more.

ILAFLON Resist R Plus

Our top level allrounder

An outstanding, efficient product for top level applications that require a strong combination of non-stick effect and durability.

• Solution for demanding use of baking tins
• Extremely resistant top coat
• Very good non-stick effect, very good durability and stain resistance
• Excellent feasibility of customer-specific product features
• Short-term use up to 250 °C possible

Here you can see what that means for you as a consumer.

ILAFLON Triplus

Our non-stick specialist

A product with an efficient coating technology that is derived from the cookware segment.

• PTFE-based top coat for highest performance
• Extraordinary corrosion resistance
• Longest lifetime of baking tins
• Solution for most demanding and semi-industrial baking
• Short-term use up to 250 °C possible

Here you can see what that means for you as a consumer.

ILAFLON Select R

A single-layer system with good conditions.

• System with excellent non-stick effect
• Best cleanability
• Suitable for microwave inner housings, raclette pans (aluminised steel) and much more

ILAFLON Select PR

Is a one-coat non-stick system. The decorative coating has very good anti-corrosive properties and is easy-to-clean.

ILATECH PR - Most Use Line

The products of the ILATECH PR series are NMP free and are made on a solvent basis.

ILATECH PR coatings impress with their excellent corrosion, chemical reistance and with excellent adhesion to most common substrates.

Especially in the area of "home & garden", ILATECH PR coatings have been valued by amateur gardeners and professionals for years due to their excellent sliding and cutting properties.
In addition, an outstanding abrasion resistance supports the durability of the tools in the long term.

Due to the relatively low baking temperature of 240 °C [464 °F], metal substrates can also be coated gently.
The simple processing, consistently high quality and the "easy-to-handle" convince manufacturers of gardening tools worldwide when it comes to application.

Further properties can also be achieved by adding additives or using special raw materials.

Advantages of products from the ILATECH PR series:

• Quality and performance proven over years
• Best price performance ratio
• Outstanding cut and cutting properties
• Available in dark, grey and yellowish colors

We certainly have the right coating for your application. Please contact us for more information.

ILAFLON Select SP-300 PFAS-free

is a multifunctional non-stick system with outstanding performance.

• Non-stick optimized system
• Good corrosion resistance
• PFAS- and PTFE-free technology
  
  
• available for EU with Swiss Shield technology

The selection of suitable substrate materials and adherence to the application and drying processes are essential in order to be able to meet the technical quality and the regulations required in the EU with coated food contact materials.

ILAFLON Professional R

Our non-stick specialist in the Professional range

The product with an efficient coating technology that is used in industrial bakeware production. The top coat is based on a special fluorpolymer/resin blend.

• Fluorpolymer/resin-based top coat for highest performance
• Excellent feasibility of customer-specific product features
• Longest lifetime of baking tins
• Solution for most demanding and semi-industrial baking
• Short-term use upe to 250 °C possible

Here you can see what that means for you as a consumer.

ILAFLON Select SP-300 PFAS-free

The one-coat silicone polyester system with good non-stick effect.

• Product with high surface hardness
• Well-suited system for appliances with sweet liquids
• PFAS- and PTFE-free technology
  
  
• available for EU with Swiss Shield technology

The selection of suitable substrate materials and adherence to the application and drying processes are essential in order to be able to meet the technical quality and the regulations required in the EU with coated food contact materials.

ILATECH PR Low Cure - Most Use Line

The products of the ILATECH PR series are NMP free and are made on a solvent basis.

ILATECH PR coatings impress with their excellent corrosion and chemical resistance with excellent adhesion to most common substrates.

ILATECH PR Low Cure coatings convince with their excellent sliding and cutting properties, in addition an outstanding abrasion resistance supports the durability of the coated tools in the long term.

The special variant to the PR family also impresses high-performance tool manufacturers with its low baking temperature of 200 °C [392 °F]. This also enables specially hardened steel substrates to be coated gently.

Here, too, the simple processing, consistently high quality and the "easy-to-handle" manufacturer of gardening tools from all over the world are convincing.

Further properties can also be achieved by adding additives or using special raw materials.

Advantages of products from ILATECH PR Low Cure series:

• Gentle coating even of specially hardened substrates due to the low baking temperature
• Outstanding cut and cutting properties
• Easy to use
• Available in dark, grey and yellowish colors

We certainly have the right coating for your application Please contact us for more information.

ILAFLON Resist SP-800 PFAS-free

Our talent for all casseroles

The system with top end performance.

• Your benefits as a consumer and what that means:
• PTFE and PFAS-free technology
• Top-end solution for demanding baking and roasting
• two coat system with very good non-stick effect and excellent stain resistance
• outstanding corrosion resistance and guaranteed dishwasher safe
• thanks to very high surface hardness, resistance to scratches
• PFAS and PTFE-free technology

ILAFLON Resist R Plus FF

Our top level allrounder -
New as PTFE- and PFAS-free version

An outstanding, efficient product for top level applications that require a strong combination of non-stick effect and durability.

• Solution for demanding use of baking tins
• Extremely resistant top coat
• Very good non-stick effect, very good durability and stain resistance
• Excellent feasibility of customer-specific product features
• Short-term use up to 250 °C possible

Here you can see what that means for you as a consumer.

ILAFLON Resist SP-500 PFAS-free

Our two-layer system with good scratch and corrosion resistance.

• Silicone polyester-based product with good non-stick effect
• The good scratch resistance even allows minimal use of scraping aids
• E.g. for raclette pans or chocolate fondue pots
• PFAS- and PTFE-free technology
  
  
• available for EU ONLY with Swiss Shield technology

The selection of suitable substrate materials and adherence to the application and drying processes are essential in order to be able to meet the technical quality and the regulations required in the EU with coated food contact materials.

ILAFLON Resist SP-800 PFAS-free

Our silicone polyester-based system with the best corrosion protection.

• Good system especially for sweet foods
• E.g. for chocolate fondue pots, various waffle irons or sandwich irons
• PFAS- and PTFE-free technology
  
  
• available for EU ONLY with Swiss Shield technology

The selection of suitable substrate materials and adherence to the application and drying processes are essential in order to be able to meet the technical quality and the regulations required in the EU with coated food contact materials.

ILAFLON Resist SP-100 PFAS-free

Simple system with a good price-performance ratio, which nevertheless has very good abrasion resistance and is dishwasher-safe. The product is available in many color variants, which is also increasingly in demand with kitchen gadgets.

This product is based on a
PFAS and PTFE-free technology.

ILAFLON Select R Two Coat

Our "Most Use" essential allrounder

A simple but versatile product with good performance and durability.

• Good non-stick effect, good corrosion resistance
• Excellent feasibility of customer-specific product features
• Versatile system for sweet and savory baking
• Solution for regular use of baking tins
• Short-term use up to 250 °C possible

Here you can see what that means for you as a consumer.